Answers are grounded in this paper and cite their sources.
Butt-welded splices in reinforcing bars are routinely made on South Asian construction sites with general-purpose rutile electrodes, without preheat or procedure qualification. This study examines the consequences for three commercial thermomechanically treated (TMT) bars, B500CWR (10 mm), B500DWR (16 mm) and B600D-R (16mm),joinedbyshieldedmetalarcweldingwithE6013 electrodes under those conditions. The bars were characterised before and after welding by optical emissionspectroscopy,tensile,bend and rebend testing,opticalmetallography,Vickershardness traversesand scanning electron fractography.As received,allthree barsshowed the TMT casetransition–core structure and met their specified strength requirements. After welding, retention of yield strength fell from 93.6% to 87.4% to 79.4%, of tensile strength from 88.3% to 79.7% to 72.1%, and of elongation from 49.9% to 26.9% to 21.8%, in the order of carbon equivalent (0.432, 0.541 and 0.647, IIW). The weld metal was the softest region of every joint (81–87% of the base-metal hardness); the heat-affected zone softened in B500CWR but hardened to 229–240 HV in the two higher grades, without forming martensite. B500CWR passed all post-weld bend and rebend tests, and one of its joints failed in the base metal by microvoid coalescence. B500DWR passed only one of three rebend tests and B600D-R failed every post-weld test; both fractured in the weld metal by cleavage initiated at gas porosity. No joint developed the 125% of specified yield strength that AWS D1.4 requires of a direct buttsplice.Carbon equivalent,ratherthan strengthgrade,governstheresponseofTMT barsto uncontrolled site welding.
No takes yet. Share an insight, caveat, or question.
Mahmud et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: