Answers are grounded in this paper and cite their sources.
The Structured Cam Clay (SCC) model is attractive for cement-treated clays because it adds only a few parameters to Modified Cam Clay. However, how those parameters control the predicted response, and whether they can be recovered from routine laboratory tests, has so far been examined only one parameter at a time. This study reports a variance-based global sensitivity and identifiability analysis of SCC extended for cohesion. A vectorised strain-driven integrator was written for conventional drained and undrained triaxial compression and verified against closed-form Modified Cam Clay solutions to within 0.12%. Seven parameters were sampled over ranges representative of lightly to moderately cemented clays, and first-order and total-order Sobol′ indices were computed from 18 432 simulations per stress path. Undrained peak strength depended almost entirely on cohesion and the critical state stress ratio (total-order indices 0.73 and 0.26), while the compressibility and structure parameters governed only the strain needed to reach it. Under drained loading, the additional void ratio and the destructuring index dominated volume change and stiffness (total-order indices 0.68 and 0.71). Whenever structure was significant, the undrained strength reduced to a simple closed form, q max ≈ (M*p′ y,i + C)/2, which was accurate to within 5% for 92% of the sampled parameter sets and is a lower bound to the full solution. A rejection-sampling analysis of 200 000 parameter sets showed that the critical state stress ratio and cohesion trade off almost perfectly in a single undrained test, and that the swelling index cannot be identified from triaxial stress–strain curves even when drained and undrained tests are combined. On this basis, a staged calibration protocol is proposed in which each parameter is fixed from the measurement that isolates it, and the protocol is applied to five cement-treated sandy clays from Southwest Nigeria. The results show that parameter influence is a property of the parameter, the output and the stress path together, and that a soil unremarkable in undrained strength can be the most compressible in drained shear.
No takes yet. Share an insight, caveat, or question.
Igbeneghu et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: