Answers are grounded in this paper and cite their sources.
This research analysis the effect of zirconium nitride (ZrN) reinforcement on the mechanical, tribological, microstructural, and thermophysical characteristics of the AZ80 magnesium alloy-based metal matrix composite. The composites made with 0, 3, 6, and 9 wt.% ZrN were analyzed by scanning electron microscopy (SEM), energy-dispersive spectroscopy, mechanical testing, dry sliding wear testing, and laser flash analysis (LFA). The hardness, flexural strength, tensile strength, yield strength of the composites progressively increased with increasing ZrN content, whereas elongation decreased. The hardness and ultimate tensile strength values at 9 wt. % ZrN were 110 ± 4 VHN and 305 ± 8 MPa, respectively, which are higher than those obtained for the unreinforced alloy (68 ± 2 VHN and 210 ± 5 MPa). The wear rate and coefficient of friction were also significantly reduced to 2.1 × 10 −6 mm 3 /N·m and 0.31, respectively, at a load of 10 N. Microstructure analysis showed that with the increase in ZrN content, there was an improvement in the distribution of the reinforcements and the interaction between the matrix and the particles. The proposed model has a lower error rate, with an Mean Squared Error (MSE) of 0.02, an Mean Absolute Error (MAE) of 0.04, and an Root Mean Square Error (RMSE) of 0.08. The results show that AZ80 composites reinforced with ZrN are promising materials for lightweight structural applications where improved strength and wear resistance are required.
No takes yet. Share an insight, caveat, or question.
Navaneethasanthakumar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: