Answers are grounded in this paper and cite their sources.
This study presents a comprehensive energetic, exergetic, advanced exergetic, economic, environmental, and climate-dependent assessment of a cascade refrigeration system. R744 is employed in the low-temperature cycle, while R134a, R404A, R1234yf, R717, R290, and R152a are comparatively evaluated in the high-temperature cycle. The effects of LTC condensation temperature and cascade temperature difference are investigated with respect to COP, exergy efficiency, total cost rate, and TEWI. Among the investigated refrigerants, R744/R152a provides the most favorable overall performance, achieving a maximum cycle COP of approximately 1.52 and an exergy efficiency of 34.8% at a cascade condensation temperature of about −14 °C, whereas R744/R717 provides the lowest total cost rate at a cascade temperature difference of 5 K. R744/R152a yields a TEWI of 1718 t CO2-eq, which is 25.34% lower than R744/R404A. Increasing the cascade temperature difference from 3 to 12 K decreases its COP from 1.591 to 1.279 and the heat-exchanger area from 31.67 to 12.52 m2. Advanced exergy sensitivity analyses yield avoidable shares of 59.68–71.46%, consistently identifying the HTC compressor as the leading improvement target. Annual system COP values are 1.57, 1.73, and 1.77 for İzmir, Ankara, and Hakkari, with corresponding TEWI values of 1508.4, 1374.6, and 1341.5 t CO2-eq, respectively. These findings support sustainable refrigerant selection through joint consideration of efficiency, emissions, cost, and component improvement potential.
No takes yet. Share an insight, caveat, or question.
Ayşe Fidan Altun (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: