Answers are grounded in this paper and cite their sources.
Frequency‐modulated continuous‐wave (FMCW) LiDAR is a promising technology for high‐precision three‐dimensional (3D) metrology in intelligent manufacturing. However, conventional single‐swept‐laser FMCW LiDAR is constrained by sweep bandwidth and limited scalability for multi‐path parallel measurement. Here, we demonstrate a spectrum‐multiplexed FMCW LiDAR system using a chip‐integrated soliton microcomb. Carrier‐suppressed dual‐sideband modulation converts each comb tooth into linearly frequency‐swept sidebands, generating spectrally separated FMCW channels for bandwidth synthesis and parallel ranging. A frequency‐shift‐assisted dual‐sideband readout separates the oppositely chirped beat notes in the RF domain, enabling single‐channel recovery of both sideband signals and preserving channel scalability. Eight‐channel bandwidth synthesis confines static‐target measurement residuals within and reduces the maximum measurement standard deviation to 1.39 . For moving targets, the wide comb spacing induces channel‐dependent Doppler shifts that prevent direct bandwidth synthesis. A weak residual carrier serves as an in‐channel reference to compensate for the channel‐dependent Doppler component. This enables coherent bandwidth synthesis during linear motion and vibration measurements. We regroup spectral resources into four parallel ranging paths for multilateration‐based 3D localization of static and moving targets. Microcomb‐based spectral multiplexing enables a configurable FMCW LiDAR architecture combining enhanced resolution with parallel measurement.
No takes yet. Share an insight, caveat, or question.
Zhai et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: