Answers are grounded in this paper and cite their sources.
When glass filaments are bundled as a yarn and impregnated with a polymer, the analysis of the strength distribution becomes complex, as filament load-sharing and coating efficiency govern rupture, especially under alkali attack. This study investigates the tensile strength and its statistical characteristics of acrylic-impregnated E-glass yarns, containing 4200 filaments of 17 μm in diameter and a polymer content of 17%, before and after alkaline exposure, along with the corresponding uncoated yarn. The tensile strength of the uncoated yarn is found to be lower than that estimated for a single filament, with a gradual reduction in stiffness due to progressive filament failure originating at 40% of the yarn strength. Both the uncoated and impregnated yarns exhibited Weibull strength distributions, with the latter having a substantially higher Weibull modulus. Importantly, the coating leads to yarn strength much beyond that of the greige and about 10% higher than the estimated single filament strength while maintaining the stiffness up to failure, indicating that the polymer matrix governs filament load-sharing and failure. This could be attributed to the higher Weibull modulus of the impregnated yarn (i.e., 18 for coated yarn versus 9 and 7 for the greige and single filament, respectively). The impregnated yarns were also tested after exposure to an alkaline solution with pH 13 for 7, 28, and 56 days. Such attack caused only marginal strength loss after 7 days but later reduced the mean yarn strength by 33% after 56 days. Despite such degradation, the elastic modulus, coefficient of variation of the strength, and Weibull modulus remained unchanged throughout the exposure period. The results suggest that alkaline exposure predominantly leads to propagation of existing flaws rather than introducing new, larger defects. The findings through the Weibull analysis demonstrate that polymer-impregnation of E-glass yarn increases strength, lowers variability and promotes stiffness retention until rupture. Moreover, alkaline degradation shifts the strength distribution toward lower values without substantially increasing its scatter.
No takes yet. Share an insight, caveat, or question.
Kusumanchi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: