Answers are grounded in this paper and cite their sources.
To address the poor friction, wear, and antistatic performance of poly(decamethylene terephthalamide) (PA10T), this study develops multi‐walled carbon nanotube (MWCNT) and wear‐resistant agent (SLS‐22F) reinforced PA10T composites via an in situ reactive extrusion strategy. Using a low‐molecular‐weight prepolymer ensures uniform filler dispersion under mild shear while preserving MWCNTs' integrity before chain extension. The hybrid composites exhibit accelerated crystallization, enhanced thermal stability, higher heat deflection temperatures up to 126°C, and reduced water absorption of approximately 0.20%. Mechanical and tribological tests show a strong synergistic effect in the PA10T‐4 composite containing 4 wt% MWCNTs and 4 wt% SLS‐22F, achieving a peak flexural strength of 119 MPa, an impact strength of 4.4 kJ/m 2 , the lowest friction coefficient of 0.38 and wear rate of 0.010 mg/min, and a dramatic wear track depth reduction from over 13 μm to between 1.5 and 2.5 μm. In addition, the flexural modulus increases monotonically with increasing filler content. Furthermore, MWCNTs loadings of 8 wt% and above establish a conductive network that decreases surface resistance to 1.0 MΩ, imparting excellent antistatic properties. This scalable approach offers a promising pathway for durable, self‐lubricating engineering plastics.
No takes yet. Share an insight, caveat, or question.
Pu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: