Answers are grounded in this paper and cite their sources.
Assembly deformation during staged wind turbine hub installation changes both the positions and the available bolt insertion spaces of individual holes. Existing studies can analyze deformation and variation at the assembly level and support tolerance optimization. However, for assembly features such as bolt holes, existing methods do not directly use the predicted deformed geometry to determine the position and diameter corrections required before assembly. This study develops an inverse tolerance compensation framework for individual bolt holes. A staged finite element model predicts hub deformation, after which the deformed hole geometry is reconstructed from finite element point clouds. The hole center displacement and the minimum space available for bolt insertion are converted separately into position and diameter corrections and incorporated into a spatial dimensional chain for Monte Carlo evaluation. For the 60 bolt holes on three hub faces, the estimated defect rates decrease from 29.02%, 28.04%, and 29.71% to 0.10%, 1.93%, and 6.72%, respectively. These results demonstrate that the proposed framework converts the deformation of individual assembly features into actionable machining corrections and substantially reduces the risk of bolt hole interference. The present evaluation is based on numerical models with prescribed tolerance distributions; future work will evaluate the framework using production data.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: