Answers are grounded in this paper and cite their sources.
This work reports on the development of immobilized mixed-matrix PES membranes incorporating TiO2, h-BN, and h-BN/TiO2 nanocomposite for the photocatalytic degradation of ciprofloxacin (CIP) as a model pharmaceutical pollutant. The membranes were fabricated via phase inversion using different nanomaterial loadings (0.5–2 wt%) and characterised using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and contact angle analysis. The incorporation of the nanomaterials into the polymer matrix was confirmed with variations in membrane morphology and surface hydrophilicity depending on the nanomaterial and loading. Under UV irradiation, the TiO2-modified membrane (T1-PES) achieved a maximum CIP degradation efficiency of 43.18% with a pseudo-first-order rate constant of 0.00239 min−1. In contrast, the h-BN-modified membranes exhibited the lowest overall performance, with the maximum degradation being observed for the h-BN2-PES, achieving 18.15% degradation with a rate constant of 0.000907 min−1, attributed to its limited photocatalytic activity despite successful incorporation into the membrane. The h-BN/TiO2-modified membranes showed the highest overall photocatalytic performance, with h-BNT1.5-PES demonstrating the highest overall performance, achieving 51.04% degradation, while h-BNT2-PES exhibited the fastest apparent kinetics, with a rate constant of 0.00263 min−1. These findings demonstrate that photocatalytic performance depends on both nanomaterial composition and loading, with the optimum loading for degradation efficiency differing from that for reaction kinetics. The results highlight the potential of h-BN/TiO2-modified PES membranes as immobilized photocatalytic systems for pharmaceutical contaminant removal.
No takes yet. Share an insight, caveat, or question.
Mabaso et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: