Answers are grounded in this paper and cite their sources.
Refractory high-entropy alloys (RHEAs) exhibit excellent mechanical strength and thermal stability, but their practical application is frequently limited by insufficient oxidation resistance. This study develops a machine-learning-assisted workflow for multi-objective screening of hardness and isothermal oxidation resistance in RHEAs. The selected baseline hardness XGBoost model and baseline oxidation random forest model achieve held-out R 2 values of 0.79 and 0.76, respectively. The current fitted models screen 109,571 quinary compositions and are compared with six alloys fabricated following an initial ML-assisted multi-objective selection targeting contrasting hardness–oxidation trade-offs. Among these alloys, HHHO_2 exhibits the highest measured hardness of 780 ± 8 HV, whereas LHHO_1 exhibits the lowest specific mass gain of 2.75 ± 0.04 mg/cm 2 , corresponding to an oxidation-resistance index I ox of − 0.44 after oxidation at 1000 °C for 20 h. The comparatively large oxidation-prediction errors motivate development of a time-resolved oxidation model incorporating oxidation duration and a composition-weighted Pilling–Bedworth ratio. Within the complete feature set, gradient boosting achieves a five-fold cross-validation R 2 of 0.92 ± 0.02 and a held-out R 2 of 0.94. For three further alloys selected using the initial advanced-model predictions, the advanced model reduces the mean absolute I ox prediction error from 0.46 to 0.21, representing an approximately 53% reduction relative to the baseline oxidation model. The refined HHHO candidate exhibits a hardness of 661 ± 11 HV and a specific mass gain of 6.20 ± 0.01 mg/cm 2 . Repeated out-of-fold SHAP and cross-model ranking analyses are used to assess the robustness of the learned associations, while multivariate applicability-domain analysis identifies candidates requiring extrapolative interpretation. Overall, the workflow provides an experimentally informed approach for prioritizing RHEA compositions with different hardness–oxidation trade-offs while explicitly accounting for model variability and compositional applicability.
No takes yet. Share an insight, caveat, or question.
Lin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: