Answers are grounded in this paper and cite their sources.
The relevance of the problem. Epoxy resins are widely used in modern construction for adhesives, coatings, and polymer concretes. Their performance depends on reactive diluents – glycidyl ethers, which integrate into the polymer matrix. However, the wide use of these compounds requires a precise assessment of their fire hazard. One of the key indicators is the heat of combustion, but existing calculation methods often show significant discrepancies for epoxy com-pounds compared to experimental data. Goal. The research aims to investigate the accuracy of calculat-ing the heat of combustion for active epoxy diluents (aliphatic glycidyl ethers) and to evaluate how the specific structure of the epoxy cycle affects the relia-bility of the results. Methodology. The heat of combus-tion for methyl, ethyl, n-butyl, and tert-butyl glycidyl ethers was determined using three theoretical methods: the structural-additive method (using structural con-stants), the chemical bond energy method, and the elemental composition method (based on mass fraction of C, H, O). The calculated values were compared with experimental calorimetric data to determine absolute and relative errors. Results. It was estab-lished that the molar heat of combustion increases with the length of the alkyl radical, ranging from 2355.6 kJ/mol to 4392.2 kJ/mol. The structural-additive method proved to be the most accurate, with a minimal error of 0.1–1.7 %. The elemental composi-tion method provided acceptable accuracy (2.8–3.0 %) but failed to distinguish between structural isomers. The chemical bond energy method was found to be unsuitable for epoxy compounds, showing a high error of 20.5–21.2 % аnd underestimating the heat of com-bustion by 482.1–933.1 kJ/mol. Scientific novelty. The study quantified the accuracy of standard thermody-namic calculation models when applied to glycidyl ethers. It was demonstrated that the specific internal structure of the oxirane ring significantly alters the thermodynamic balance during combustion, which is not accounted for by standard bond energy schemes, making the structural-additive approach the only reliable theoretical tool for these substances. Practical value. The results allow for the recommendation of the structural-additive method as a reliable tool for the preliminary fire safety assessment of new epoxy com-posites at the chemical design stage. This enables the optimization of active diluent content in building mate-rials to achieve required fire resistance levels.
No takes yet. Share an insight, caveat, or question.
Hapon et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: