Answers are grounded in this paper and cite their sources.
Fruit-processing residues represent a largely underutilized class of agricultural waste with considerable potential for low-cost water treatment applications. This study investigated the capacity of dried watermelon peel (Citrullus lanatus) — designated WMP — to adsorb Pb(II), Zn(II), Cu(II), Cr(VI), and Ni(II) ions from synthetic aqueous solutions through systematic batch experimentation. The effects of contact time (30–180 min), adsorbent dose (1–5 g), initial metal concentration (10–90 mg/L), solution pH (2–10), and temperature (30– 70°C) were each evaluated. Optimal removal of cationic metals occurred at pH 6, while Cr(VI) showed maximum uptake at pH 4 rather than the strongly acidic pH 2 commonly reported for lignocellulosic adsorbents, peaking at 67% removal — a divergence attributed to the pectin-rich surface chemistry of watermelon peel. Nickel achieved the highest overall removal of 97.0% at 180 minutes, and lead maintained an exceptional 90% efficiency across the entire tested concentration range of 10–50 mg/L. Equilibrium data for Pb²⁺, Zn²⁺, Cu²⁺, and Ni²⁺ conformed best to the Langmuir isotherm (R² = 0.972–0.991), while Cr(VI) data fitted the Freundlich model more closely (R² = 0.939), indicating a mechanistic divergence in chromium uptake relative to the four cationic metals. The Pseudo-Second-Order kinetic model provided an excellent description of adsorption rates for all five metals (R² = 0.998– 0.999), implicating chemisorption as the dominant rate-controlling mechanism. Thermodynamic analysis yielded negative ΔG° values (−0.400 to −0.610 kJ/mol), negative ΔH°, and positive ΔS° across all systems, confirming spontaneous, mildly exothermic, and entropy-driven adsorption. Scanning electron micrographs revealed a porous, spongy preadsorption surface that became densely packed after metal loading, while FTIR spectroscopy identified carboxylate, amine, sulfate, and ester functional groups as binding sites, with pronounced post-adsorption spectral shifts in the carboxylate region confirming the involvement of pectin-derived carboxyl groups in metal complexation. The findings collectively establish WMP as a high-performing, mechanistically distinctive, and eco-friendly biosorbent suitable for multi-metal wastewater treatment.
No takes yet. Share an insight, caveat, or question.
Ndukwu et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: