Answers are grounded in this paper and cite their sources.
Background: Incorporating boron compounds into additively manufactured dental resins may improve antibacterial activity; however, their effects on color stability and surface properties require evaluation. Aim: To evaluate the effects of different sodium pentaborate (SPB) concentrations on the color stability, surface roughness, surface morphology, and antibacterial properties of a three-dimensionally printed permanent crown resin before and after simulated toothbrushing. Materials and Methods: A permanent crown resin was modified with 0 wt%, 1 wt%, 2 wt%, or 3 wt% SPB. A total of 148 specimens were fabricated using a stereolithography-based three-dimensional printer and divided into 4 groups. The specimens were finished with 600-, 800-, 1000-, and 1200-grit silicon carbide papers, airborne-particle abraded with 110-µm Al₂O₃ at 2.5 bar, and polished with polishing paste. The specimens underwent 10, 000 simulated brushing cycles. Color was measured with a spectrophotometer, and surface roughness was evaluated before and after brushing using a profilometer. Surface morphology was examined using field-emission scanning electron microscopy. Antibacterial activity was evaluated according to ISO 22196. Color-change data were analyzed using the Kruskal-Wallis and Dunn tests, whereas surface roughness data were analyzed using two-way robust analysis of variance and Bonferroni-adjusted comparisons (α=.05). Results: Color change increased as the SPB concentration increased. Surface roughness increased after brushing, and the 3 wt% SPB group exhibited the greatest post-brushing roughness. Microscopic evaluation showed more pronounced surface alterations at higher SPB concentrations. Antibacterial activity also increased with increasing SPB concentration. Conclusion: SPB incorporation improved the antibacterial properties of the tested permanent crown resin but adversely affected its color stability and surface roughness, particularly at higher concentrations. Lower SPB concentrations may provide a more favorable balance between antibacterial activity and optical and surface properties.
No takes yet. Share an insight, caveat, or question.
Abdulai et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: