Answers are grounded in this paper and cite their sources.
Copper’s high thermal conductivity and reflectivity make stable melting challenging in powder bed fusion using a laser beam (PBF-LB), particularly under (near-) infrared irradiation. This study develops a high-fidelity computational fluid dynamics (CFD) model in OpenFOAM to simulate copper PBF-LB, incorporating surface tension, Marangoni convection, evaporation, and buoyancy. To address uncertainties in reported absorptivity values, a sensitivity-based calibration is performed. The model is validated against experimental single-track cross sections for Gaussian and 35-65 ring-shaped beam profiles at local absorptivities of 15 % - 17 %, and for 20-80 and 10-90 ring-shaped beam profiles at 9.3 %. The validated model is used to investigate the effects of beam shaping and effective input power on melt-pool dynamics and global absorptivity (absorbed-to-nominal power ratio). Results show a strong correlation between beam shape with these responses, governed by the melting mode. Gaussian beams exhibit distinct conduction, transition, and keyhole regimes, while no clear keyhole formation is observed for the ring-shaped beams under the investigated conditions. Across all cases, melt-pool size and global absorptivity increase with local absorptivity, but their evolution differs significantly between beam types due to distinct energy redistribution mechanisms. Temporal analysis further shows that higher power accelerates keyhole formation in Gaussian cases and increases the time lag between the stabilization of keyhole melting and melt-pool depth, while ring-shaped beams with higher core-to-ring power ratios delay the onset of quasi-steady depression-zone formation. These results provide insights into how beam shaping and effective input power influence melt-pool behavior and energy absorption in copper PBF-LB.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2026) studied this question.