Answers are grounded in this paper and cite their sources.
Waste tire pyrolysis offers an attractive route for converting abundant waste into valuable chemicals; however, the resulting pyrolytic oil remains a complex mixture with limited direct applications. Enriching the oil in monoaromatic hydrocarbons (MAHs) enhances its value and facilitates downstream processing. Here, tungstophosphoric acid (TPA)-TiO₂ catalysts were optimized using a central composite design to evaluate the effects of TPA loading (5.7–69 wt%) and calcination temperature (138–562 °C) on catalyst acidity and aromatic selectivity. Response surface modeling identified an optimal catalyst containing approximately 37 wt% TPA calcined at 350 °C, exhibiting a balanced distribution of Brønsted acid sites and high MAH selectivity. Structural characterization revealed that excessive TPA loading caused partial pore blockage and reduced surface area, whereas high calcination temperatures altered the supported heteropolyacid phase, negatively affecting catalyst performance. Product distribution analysis demonstrated that acidity governs aromatic selectivity, driving the transition from terpene aromatization and p-cymene accumulation toward reactions that maximize MAH formation, whereas excessive acidity favored heavier aromatic compounds. The optimized catalyst achieved MAH selectivities above 60% in a laboratory-scale reactor. These findings establish quantitative relationships among catalyst synthesis, acidity, and aromatic selectivity, providing a rational framework for designing supported heteropolyacid catalysts for pyrolysis-based waste valorization.
No takes yet. Share an insight, caveat, or question.
Vargas et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: