Answers are grounded in this paper and cite their sources.
This paper reports on the implementation process of the three-dimensional (3D) edge plasma transport code EMC3-EIRENE on the Divertor Tokamak Test (DTT) facility and the results of its first application, with a focus on assessing the heat load on the Ion Cyclotron Resonance Heating (ICRH) antenna surfaces. The full 3D ICRH antenna structure is incorporated in the 3D simulations. Assuming different toroidal symmetry for the antenna to determine whether the heat load assessment can be carried out with reduced computational effort, and to what extent a 3D assessment deviates. The predictions of the 3D antenna heat load distribution are obtained and the peak values on the top plate and the two side plates reach 0.9, 2.1 and 3.8 MW/m², respectively. The scan of transport coefficients reveals that the heat load was mainly influenced by the plasma density. Increasing the transport coefficients could lead to a corresponding increase in the heat load up to 1-2 order of magnitude. 3D gas puffing is included to evaluate its impact on the antenna heat load. It can increase the local plasma density near the antenna, potentially raising the heat load on the antenna surfaces by a factor of 2–3. The corresponding 3D edge plasma behavior is presented under the coupled effects of gas puffing and the antenna geometrical structure.
No takes yet. Share an insight, caveat, or question.
Wu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: