Answers are grounded in this paper and cite their sources.
The electrification of small-scale rural vehicles offers a potential alternative to conventional fuel-powered vehicles for agricultural applications. This study presents the sizing of the motor and the transmission of an electric traction system for a small-scale rural utility vehicle intended for family farming. Commercially available components were prioritized to limit costs, although no quantitative economic assessment was performed. A 15-CV, 1800-rpm motor was evaluated analytically for speeds of up to 40 km/h and slopes of up to 50% at full load. The power required to start the fully loaded vehicle ranges from 2.42 CV (level terrain) to 13.03 CV (50% slope), and a two-range transmission with overall ratios of 5.1–55.4 is required. A longitudinal dynamics simulation, used as a consistency check, reproduced these values; with rolling resistance, aerodynamic drag, and drivetrain losses, continuous climbing of the 50% slope required 12.86–14.48 CV. With a 20% design margin derived from a sensitivity analysis, the motor torque suffices for continuous full-load climbing of slopes up to 40% on soil. For a 4 × 2 drive, adhesion, not motor power, limits full-load climbing on soil to about 20–33%; of the 7.5–20-CV ratings evaluated, 15 CV is the smallest that does not reduce this limit further. All results are theoretical and must be confirmed by prototype tests.
No takes yet. Share an insight, caveat, or question.
Santos et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: