Answers are grounded in this paper and cite their sources.
Solid-liquid equilibria (SLE) relevant to the antisolvent crystallization of lithium hydroxide monohydrate (LiOH·H2O) from water-2-propanol mixtures were experimentally investigated in the presence of process-relevant hydroxide and chloride impurities (NaOH, KOH, LiCl, NaCl, and KCl) at 25 °C. Solubility measurements showed that NaOH, KOH, and LiCl reduce the solubility of LiOH through the common-ion effect while remaining relatively soluble themselves, indicating favorable conditions for selective LiOH·H2O crystallization. In contrast, NaCl and KCl exhibit limited solubility at higher 2-propanol mole fractions and therefore represent critical impurities that can co-crystallize with LiOH·H2O. The experimental equilibrium data were used to develop a thermodynamic model based on the mixed-solvent electrolyte (MSE) framework of OLI Systems. The model accurately reproduces the experimentally observed solubility behavior and was validated using synthetic process solutions representative of industrial lithium hydroxide production routes. Antisolvent crystallization experiments confirmed the model predictions and demonstrated that high-purity LiOH·H2O can be produced from hydroxide- and LiCl-containing process streams, whereas systems containing NaCl and KCl are prone to co-crystallization of impurities. The developed model provides a quantitative tool for the design, optimization, and impurity management of industrial LiOH·H2O antisolvent crystallization processes.
No takes yet. Share an insight, caveat, or question.
Lemmens et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: