Answers are grounded in this paper and cite their sources.
Objectives This study evaluated the degree of conversion (DC), mechanical properties, fluoride release, and color stability of a newly developed ion-releasing resin composite (Thamfil) containing calcium phosphate and bioactive glass compared to commercial materials. Methods DC was measured using attenuated total reflectance Fourier-transform infrared spectroscopy ( n = 5). Biaxial flexural strength (BFS) and modulus (BFM) were tested after 24 hours of immersion in deionized water at 37°C ( n = 5). The cumulative fluoride release in deionized water for 4 weeks was also determined ( n = 4). Color stability (∆E* 00 ) was assessed after continuous immersion in deionized water or red wine at 37°C for 2 weeks ( n = 5 per solution) using an intraoral spectrophotometer. Comparisons included FiltekBulk (3M Oral Care), BeautifilBulk (Shofu), and CentionN (Ivoclar Vivadent). Results Thamfil showed significantly higher DC (74%) than other materials (46%–54%, p < 0.05). BFS was highest for FiltekBulk (232 MPa), while Thamfil (133 MPa) was comparable to CentionN (160 MPa) and BeautifilBulk (126 MPa) ( p > 0.05). BFM of Thamfil (2.6 GPa) was similar to that of BeautifilBulk (2.3 GPa) and CentionN (3.3 GPa) ( p > 0.05). The cumulative fluoride release at 28 days for Thamfil (3.3 ppm) was comparable to BeautifilBulk (3.4 ppm) but was lower than CentionN (92.3 ppm). Thamfil showed higher ∆E* 00 in water (3.6) than other materials (0.5–1.3) ( p < 0.05), but a similar color change in red wine (39.2) to that of FiltekBulk ( p > 0.05). Conclusions Thamfil exhibited high polymerization but low color stability. However, the material exhibited comparable strength and fluoride release to those of a commercial ion-releasing material (BeautifilBulk).
No takes yet. Share an insight, caveat, or question.
Chotitanmapong et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: