Answers are grounded in this paper and cite their sources.
Static arrest criteria are evaluated against the nal length of dynamic ruptures.Ruptures that exceed the estimated arrest length are counted as failures of the criterion, without asking where they slowed down.We test whether such disagreements arise because the estimated arrest location is misplaced or because ruptures restart after stalling near that location.We analyse dynamic simulations on a two-dimensional fault with 197 heterogeneous stress elds and compare rst-pause locations with static arrest estimates and a uniform-alongpath baseline.With an overshoot coecient η = 4/π, of the 323 fronts whose rst pause falls within 2.03 km of a static estimate, 278 do not reach the fault end within 145.46 s.Among fronts that reach the end, 0.682 rst pause within this window, against a baseline of 0.070, and then restart after a median of 11.4 s.When a pause requires near-stagnation, static estimates locate rst pauses better than a stress-only position (0.871 versus 0.590; dierence 0.280, 95% interval 0.226 to 0.335).That position is where the initial stress, averaged over the preceding 2.03 km, rst falls below the dynamic strength.Halving the nominal cohesive zone at xed fracture energy delays throughgoing ruptures but leaves most of them throughgoing (34 of 38 and 37 of 41).Prescribed growth of fracture energy suppresses throughgoing rupture, yet under one rule ten arrested ruptures remain 1.3 to 2.7 times longer than their static estimates.Ruptures that outrun a static estimate mostly rst stall where it predicts and then restart, under both tested coecients.
No takes yet. Share an insight, caveat, or question.
Wenjie Lyu (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: