Answers are grounded in this paper and cite their sources.
The track structure of railway girder bridges is vulnerable to seismic damage under relative movement of girder ends (RMGE). However, the damage mechanism of track-girder systems (TGSs) under a multidirectional RMGE remains unclear. To investigate this problem, five full-scale substructure specimens of TGSs with CRTS-I double-block ballastless track and WJ-8 fasteners were tested under cyclic loading with a multidirectional RMGE. The damage evolution, hysteretic behavior, fastener deformation, and steel rail strain distribution were investigated. The results showed that damage was concentrated in the first two rows of WJ-8 fasteners adjacent to the girder gap, while the third row remained intact until the ultimate state. The hysteretic curves exhibited evident pinching, and the skeleton curves showed multipeak characteristics due to the sequential degradation of the fasteners. The steel rail generally remained elastic, whereas local yielding occurred under unfavorable translational–rotational deformation modes. Based on the experimental results, a numerical model was developed using the overlapping-element method, which reproduced the hysteretic behavior of the TGS under a multidirectional RMGE. The findings provide a basis for seismic assessment and damage mitigation of TGSs near the girder gap.
No takes yet. Share an insight, caveat, or question.
Zou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: