Answers are grounded in this paper and cite their sources.
Small wave energy converters can supply fresh water off the grid only if every link between the sea and the membrane is accounted for. This study couples a time-domain model of the S-shaped buoy SB-1.5 and its ball-screw power take-off (PTO), both experimentally verified in earlier work, with a batch seawater reverse osmosis (RO) model based on solution–diffusion transport, film-theory concentration polarisation, and Pitzer osmotic pressure. The PTO law is anchored to the published bench power and to a mean-to-peak ratio of 0.26 measured from the oscilloscope records, and the buoy follows the Cummins equation calibrated to the published 22 W full-scale absorbed power. In the ShiDao wave climate (2.0 kW/m), the unit absorbs 54.0 W (capture width ratio 1.83%), delivers 19.2 W of electricity and passes 7.3 W of hydraulic power to a 0.6 m² membrane element. With a batch cycle at 30% recovery, this gives about 142 L/day (51.7 m³/yr) at 0.83 g/L, whereas a fixed-pressure once-through module on the same chain gives 10.5 L/day. The hydraulic energy of 1.23 kWh/m³ is about 1.4 times the least work of separation, and the motor–pump set, at 48% stage efficiency, is the weakest link. Monte Carlo and Sobol analyses bound the output at 115–171 L/day (5–95%), with motor–pump efficiency alone explaining 58% of the variance. The simulation is calibrated to published bench tests and full-scale values, and sea trials are the next step. An unconstrained linear damper would absorb 2.6 times more power than the rating-limited PTO, and a 100 W generator raises the annual permeate from 51.7 to 79.6 m³. One unit provides 15 L/day per person for about nine people (volume only, before post-treatment), and eleven units cover a village of one hundred.
No takes yet. Share an insight, caveat, or question.
Ahmed et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: