Answers are grounded in this paper and cite their sources.
Increasing train speeds may cause the soil beneath tunnels to remain in an undrained state, leading to the accumulation of excess pore water pressure. Cyclic hollow cylinder torsional shear tests on a sand with cyclic heart-shaped stress path were conducted, varying relative densities, cyclic vertical loads and torsional shear stresses. The pore water pressure, strain behaviour, failure resistance and failure modes were presented and discussed. Test results demonstrate that the torsional shear stress component of train loading accelerated soil failure, as the additional shear accompanying principal stress rotation drives the stress state closer to failure than pure vertical cycling. Three distinct undrained behaviours were observed in sand under train loading: liquefaction, cyclic mobility, and strain accumulation, which were governed by relative densities and loading conditions. Loose sand consistently exhibited liquefaction regardless of loading conditions. For dense sand, cyclic mobility occurred under lower cyclic vertical loads, while higher cyclic vertical loads leaded to strain accumulation. There existed a critical pore pressure ratio ( u/p 0 ), at which the sand became unstable, regardless of relative densities.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: