Answers are grounded in this paper and cite their sources.
Tube Roller Compression (TRC) was used to study the relationship between the through-thickness deformation gradient, the microstructural evolution, crystallographic texture and hardness of AA6014 aluminium alloy tubes. In the most highly strained areas, the average grain size was refined from about 19.5 μm in the annealed condition to 3–4 μm by the application of non-uniform strain due to TRC, highest at the outer surface and decreasing towards the inner wall. The higher the severity of processing, the more elongated the grains became and the more heterogeneous the microstructural organization. Analysis of {111} pole figures and orientation distribution functions at φ₂ = 45° indicated an initially weak texture, with Goss as the dominant pole figure with a minor Cube component, that evolved as a result of condition-dependent redistribution of the Copper, Brass, and Goss components. As a result of this evolution, local orientations with higher texture intensities or relatively diffuse orientation distributions were obtained depending on the processing parameters. Consistent with the microstructural gradient, the hardness increased from approximately 48–52 HV near the inner region to 58–70 HV at the outer surface, depending on the processing condition. Using an objective hardened threshold defined from the annealed condition (mean + 2SD, ~ 53 HV), the effective hardened-layer depth ranged from approximately 0.2 to 1.6 mm, while Sample 5 remained above the threshold throughout the measured depth (> 1.8 mm). Based on these results, a quantitative correlation between TRC-induced strain gradient, grain refinement, texture evolution and strengthening of the local material is established. TRC therefore offers a potential pathway to achieve functionally graded aluminium tube that is hard on the outside while retaining a comparatively less-deformed core.
No takes yet. Share an insight, caveat, or question.
Zayed et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: