Answers are grounded in this paper and cite their sources.
Lithium (Li) metal anodes are fundamental to the development of next-generation high-energy-density batteries, yet their practical use is severely limited by uncontrolled dendrite growth and interfacial instability. This study proposes an effective strategy to stabilize the Li metal interface through the in situ formation of a Li-Ag alloy using a sequential thermal evaporation process. By depositing an Ag seed layer as a lithiophilic template prior to Li evaporation, the nucleation barrier is significantly reduced, facilitating more uniform and dense lithium deposition. The morphological evolution and pristine surface chemical states of the evaporated layers were investigated under air-free conditions to confirm the compositional integrity of the alloyed interface. Electrochemical evaluations in symmetric cells demonstrate that the Li-Ag alloy phase effectively regulates Li-ion flux, reducing the surface roughness by approximately 30% and leading to a markedly lower overpotential and more than a two-fold extension of cycle life compared to pure evaporated Li. These results indicate that precision-controlled vacuum deposition and in situ alloying are viable approaches for engineering high-performance interfaces, providing a robust foundation for more reliable and dendrite-suppressed lithium metal battery systems.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: