Answers are grounded in this paper and cite their sources.
Hydroborate solid electrolytes (SEs) offer fast Na + transport, low density, and compatibility with Na metal, yet their current tolerance is restricted by dendrite‐induced short circuits in all‐solid‐state Na metal batteries (ASSNBs). Here, a spatially coordinated dual‐interlayer architecture is developed to regulate dendrite initiation and propagation in Na 4 B 10 H 10 B 12 H 12 (NBH)‐based ASSNBs. At the Na|NBH interface, a three‐dimensional Sn/C framework enables Na infiltration into the porous scaffold and homogenizes current distribution, while dynamically formed Na–Sn sites facilitate Na + transport and redistribution, thereby maintaining intimate interfacial contact and suppressing dendrite initiation. Within the NBH SE, a Na 2.9375 PS 3.9375 Cl 0.0625 (NPSC) sulfide interlayer reacts with penetrating Na to suppress dendrite propagation, with crack‐like pathways terminating near the NBH|NPSC interface. This sequential regulation increases the critical current density from 0.5 to 3.3 mA cm −2 . Symmetric cells operate stably for 7000 and 1000 h at 0.5 and 3.0 mA cm −2 , respectively. Full cells with an O3‐type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 cathode retain 75% capacity after 800 cycles at 2 C, while supporting cathode loadings up to 15 mg cm −2 . This work establishes sequential control of dendrite initiation and propagation as a design principle for high‐current hydroborate‐based ASSNBs.
No takes yet. Share an insight, caveat, or question.
Kang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: