Answers are grounded in this paper and cite their sources.
This study aims to elucidate the effect of fluorine incorporation on the structural, morphological, optical, and electrical properties of In 2 O 3 thin films and to identify the fluorine concentration providing the best optoelectronic performance. Fluorine-doped indium oxide (FIO) thin films were deposited on glass substrates by ultrasonic spray pyrolysis at 400 °C with fluorine concentrations of 2, 4, and 6 at.%. X-ray diffraction revealed polycrystalline films with a cubic In 2 O 3 structure and preferential (400) orientation. Increasing the fluorine concentration slightly reduced the crystallite size and lattice parameter, indicating fluorine incorporation into the In 2 O 3 lattice. The films exhibited improved surface uniformity and grain refinement. At the same time, energy-dispersive X-ray analysis confirmed the presence of In, O, and F. Optical measurements showed a high transmittance of approximately 80%, with the direct optical band gap decreasing to 3.55 eV at 6 at.% F. Photoluminescence analysis indicated defect-related emissions predominantly associated with oxygen vacancies. In contrast, FT-IR spectra confirmed the formation of In 2 O 3 . Hall-effect measurements demonstrated n-type conductivity, with the carrier concentration and mobility increasing with fluorine incorporation and reaching 9.54 × 10 19 cm −3 and 15.51 cm 2 V −1 s −1 , respectively, at 6 at.% F. The highest figure of merit was obtained for the 6 at.% F-doped film, demonstrating that fluorine incorporation effectively improves the optoelectronic performance of In 2 O 3 . These findings identify optimized FIO thin films as promising candidates for transparent conducting and optoelectronic applications.
No takes yet. Share an insight, caveat, or question.
Bourhefir et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: