Answers are grounded in this paper and cite their sources.
Purpose This study uses machine learning to predict the performance of PLA/wood composites and identify suitable 3D printing parameters. The aim is to balance mechanical strength, material consumption, and processing requirements. Design/methodology/approach Experimental tensile and compressive strength data were used to develop second-order Ridge regression models. The models were validated using leave-one-out cross-validation (LOOCV) and then applied to predict mechanical performance across 3,125 combinations of five printing parameters: nozzle temperature, printing speed, layer height, infill density, and raster angle. Nominal material mass and relative processing burden were estimated for each configuration. Multi-objective Pareto optimization was used to identify trade-offs between mechanical performance and resource requirements. Findings The machine learning models achieved R2 values of 0.9954 for tensile strength and 0.9787 for compressive strength. Among the 3,125 configurations, 35 were identified as Pareto-optimal (1.12%). The selected best-compromise configuration had a nozzle temperature of 210 °C, a printing speed of 40 mm/s, a layer height of 0.15 mm, an infill density of 45%, and a raster angle of 0°. For this configuration, the models predicted a tensile strength of 22.38 MPa and a compressive strength of 33.75 MPa. Originality/value This study uses machine learning to predict the mechanical strength of PLA/wood composites and Pareto optimization to select suitable printing parameters. By evaluating more printing configurations than those tested experimentally, the method helps find a balance between mechanical strength, material use, and processing requirements.
No takes yet. Share an insight, caveat, or question.
Monire Norouzi (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: