Answers are grounded in this paper and cite their sources.
Gold mining is a key sector of the Ivorian economy but generates large quantities of tailings that raise important environmental, economic, and social challenges. This study explores their reuse as secondary raw materials in construction materials. Four gold mining residues, differing by mine of origin and processing route (washing or cyanidation residues) were characterized and incorporated at 50% replacement in cement mortars. Their physicochemical, microstructural, mechanical, and environmental performance was assessed. The residues are mainly composed of fine quartz-rich particles (D 80 < 180 µm) and exhibit low reactivity, as confirmed by R3 and pozzolanic index methods. This limited reactivity leads to reduced formation of hydration products, as measured by Thermogravimetric analysis, particularly hydrates (< 6.5%), compared to the reference mortar (hydrate = 9.0%). Consequently, compressive strengths are lower for tailings-based mortars (about 21–14 MPa at 28 days) than for the reference (41 MPa). Leaching tests confirm compliance with Soil Quality Decree thresholds, indicating no major environmental restriction for reuse. Overall, the results demonstrate the potential of gold mining tailings as secondary raw materials for use in construction applications.
No takes yet. Share an insight, caveat, or question.
Cherif et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: