Answers are grounded in this paper and cite their sources.
Wire arc additive manufacturing (WAAM) enables the production of large metallic components at high deposition rates, but its thermal history remains challenging to predict efficiently. This study presents a voxel-based thermal model as part of a WAAM digital twin, in which heat diffusion is computed using Gaussian convolution. The model is used to investigate uncertain thermal parameters, predict process indicators and update the simulated thermal state using recorded thermocouple measurements. A one-at-a-time sensitivity analysis was conducted, and the energetic efficiency and convective heat-transfer coefficient were calibrated using experimental temperature histories from a zigzag deposition case. The calibrated model was then assessed for a raster strategy. Joint calibration reduced the reported global mean absolute deviation (MAD) from 20.44°C to 17.32°C for the zigzag case. For the raster strategy, the simulation agreed with the experimental measurements, with a MAD of 20.90°C and a Pearson coefficient of 0.947. Simulations showed that welding-source power and torch travel speed strongly affected the model-predicted melt-pool volume. Finally, recorded thermocouple data were used offline to impose a temperature field in the instrumented region. This measurement-informed update provides a basis for further development of a thermal digital twin for WAAM, but does not constitute real-time synchronization or closed-loop control.
No takes yet. Share an insight, caveat, or question.
Ledoux et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: