Answers are grounded in this paper and cite their sources.
Road construction consumes large quantities of cement, aggregates, bituminous materials and fossil fuel energy. The production and transportation of these materials, together with on-site construction operations, contribute to greenhouse gas emissions. This paper examines the use of natural and waste-derived materials in rigid pavement concrete, based on the experimental programme reported in the supplied thesis. The materials considered are human hair, bamboo pieces/fibre, coconut (coir) fibre, ground granulated blast furnace slag (GGBS) and fly ash. The study compares compressive strength at different curing ages and material replacement or addition levels. The reported results indicate that human hair addition increased the 28-day M30 compressive strength from 33.60 MPa for the control mix to 37.25 MPa at 3% addition. Coconut fibre produced the highest reported 28-day strength of 40.50 MPa at 5% addition. For GGBS, the highest 28-day average strength was 34.22 MPa at 30% replacement, compared with 29.98 MPa for the control. In contrast, the bamboo series showed a progressive reduction in compressive strength as the reported replacement level increased, while fly ash replacement above 5% reduced 28- day strength in the reported series. These results demonstrate that sustainable materials must be proportioned individually rather than assumed to improve all concrete properties at every dosage. The thesis identifies potential environmental benefits through reduced use of conventional cement and aggregates and the productive use of waste resources. However, a project-specific lifecycle carbon inventory was not reported; therefore, this paper does not claim a quantified percentage reduction in CO₂ emissions. Further work should combine mechanical testing with a transparent life-cycle assessment and field validation.
No takes yet. Share an insight, caveat, or question.
Bhegade et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: