Answers are grounded in this paper and cite their sources.
Ceramics has emerged as a critical material in electrical insulating parts due to its superior thermal conductivity and chemical stability, while further reducing its surface energy and improving insulating performance simultaneously remains a challenge. In this study, a silicon film is deposited on the ceramic surface by an Ar/HMDSO APPJ to reduce surface energy, enhance surface resistance and flashover voltage. The precursor HMDSO is injected into APPJ from two distinct positions around the grounded electrode: upstream injection (Injection Mode 1) and downstream injection (Injection Mode 2). The effects of the precursor feedthrough position on discharge characteristics, film performances and their stability are investigated. It is indicated that decrement of surface energy and increment of flashover voltage are achieved simultaneously for ceramics treated by two injection modes, with slight variations in the stability. Moreover, the surface resistance under Mode 1 is 27.6% higher than under Mode 2. It is revealed by optical emission spectroscopy (OES), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) results, and time-of-flight secondary ion mass spectrometry (TOF-SIMS) that the species activity in DBD region for APPJ with Mode 1 is higher than Mode 2, resulting in the deposition of a denser cross-linking film. This study provides a reference for the design of APPJ electrode structure for film deposition.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: