Answers are grounded in this paper and cite their sources.
This research aims to study the effect of the gas nitrocarburizing process on surface hardness and microstructural changes of ferritic stainless steel SUS430 (0.09% C and 16.44% Cr). The specimens were initially prepared by a solution nitriding process at 1050 °C for 90 minutes, followed by cooling with nitrogen gas. After that, they were subjected to a gas nitrocarburizing process at 570 °C for 180 minutes. The results show that this process can significantly improve the surface hardness, to a maximum hardness of 1341 HV, which is an increase of 774 HV compared to the specimen treated only by solution nitriding. The treatment at 1050 °C led to the formation of a martensitic structure near the surface, which has high hardness and enhances the diffusion ability of nitrogen and carbon during the subsequent process. This diffusion resulted in the formation of a compound layer, including Fe2-3N, Fe4N, and CrN, along with a uniform diffusion zone. These are the key mechanisms responsible for the significant increase in surface hardness. The study indicates that the combination of solution nitriding and gas nitrocarburizing is an effective approach to improve the surface hardness of SUS430 stainless steel and shows high potential for industrial applications requiring wear and friction resistance.
No takes yet. Share an insight, caveat, or question.
Praditja et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: