Answers are grounded in this paper and cite their sources.
Poly(lactic acid) (PLA)/cellulose nanocrystal (CNC) films were prepared to determine how dicumyl peroxide (DCP) and a lactic acid (LA)/tin(II) 2‐ethylhexanoate/triphenylphosphine system affect thermal transitions, morphology, and tensile response. Sixteen formulations were compounded at 180°C and 60 rpm in an internal mixer and converted to films by solvent casting. Attenuated‐total‐reflectance Fourier‐transform infrared spectroscopy (ATR–FTIR) and field‐emission scanning electron microscopy (FESEM) showed composition‐dependent changes in the O–H and carbonyl regions and rod‐like CNCs averaging 11.38 nm in diameter and 237.89 nm in length; these observations support interfacial interactions but do not establish covalent grafting. DCP increased the degradation‐onset temperature of PLA from 319°C to 336°C. In contrast, CNC/LA‐containing formulations exhibited onset temperatures down to 296°C, demonstrating that thermal stability depended on formulation. LA‐containing systems showed apparent crystallinity indices up to 33.44%, compared with 23.02% for PLA. CNC alone did not improve tensile performance, whereas PCAL1_0.0045 reached 2.76 ± 0.15 GPa and 30.53 ± 0.20 MPa, corresponding to increases of 67.3% and 50.3%, respectively. Modifier composition, rather than CNC addition alone, therefore governed the measured property changes.
No takes yet. Share an insight, caveat, or question.
Santos et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: