Answers are grounded in this paper and cite their sources.
Wind loading couples translation and torsion in eccentric structures, producing unequal accelerations at opposite edges. Optimizing the response at a single location or under a single generalized input does not ensure balanced acceleration control at both structural edges. We develop a frequency-domain minimax method for two tuned mass dampers (TMDs) forming a dual-TMD system. It minimizes the largest of four normalized edge-acceleration frequency-response peaks under separate unit generalized horizontal-force and torque inputs. With total TMD mass fixed, mass allocation, tuning frequencies, and damping ratios are optimized for each candidate placement. Under matched design and numerical settings, the maximum normalized peak is 0.346, below those from horizontal-force-only objectives targeting the center of mass, flexible edge, or both edges. Across 25 structural-parameter combinations, optimized tuning frequencies deviate from coupled modal frequencies by 2.2% on average. Relative to unchanged TMD parameters, layout-specific retuning across 32 cases reduces the objective by 24.2% on average. ETABS time-history analyses evaluate the proposed design under six realizations of spatially correlated fluctuating wind loading. Relative to the uncontrolled structure, the mean reductions in the maximum root-mean-square (RMS) and maximum absolute peak accelerations across both edges are 30.62% and 25.61%, respectively. These results provide a basis for the joint design of dual-TMD parameters and placement in eccentric structures.
No takes yet. Share an insight, caveat, or question.
Lu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: