Answers are grounded in this paper and cite their sources.
To develop and validate a compact analytical model of megavoltage photon-beam lateral dose profiles, with eight physically interpretable parameters per profile, for beam-data quality assurance (QA) and treatment planning system (TPS) commissioning support. The relative dose at off-axis position x, for a field of half-width R, is expressed as D(x,R) = A·F(x,R)·P(x,R) + S(x,R), where F (a fourth-order polynomial in x/R) describes the plateau, P (an error-function pair of width σ) the penumbra, and S (an exponential) the out-of-field tail. The parameters were fitted to 58 in-plane profiles measured on an Elekta linac at 6, 10 and 15 MV (1×1 to 40×40 cm², depths 1.5–20 cm), and the model was tested on 14 independent profiles (second linac, Monte Carlo). Agreement was assessed with the root-mean-square error (RMSE), R² and the global gamma index at 2%/2 mm and 1%/1 mm. All profiles passed 2%/2 mm at 100%, with a mean RMSE of 0.551% (range 0.24–1.19%) and R² ≥ 0.9978; the independent profiles gave a mean RMSE of 0.541%. At 1%/1 mm, 99.2% of points passed, and all 6 MV profiles and all fields ≥ 4×4 cm² passed at ≥ 95%; the remaining deviations were confined to small 10–15 MV fields and low-gradient regions. The parameters followed physically consistent trends: σ increased with depth and, for fields ≥ 5×5 cm², with energy, B increased with depth and with field size up to 30×30 cm², α decreased with depth, and H and H₄ tracked the loss of horns with depth. Each parameter retains a direct physical meaning, and the parameters recovered simulated jaw-calibration and steering errors set at or below the AAPM TG-142 tolerances, supporting their use in beam-data QA and commissioning; independent dose calculation will require a continuous parameterization in depth and field size.
No takes yet. Share an insight, caveat, or question.
Zerfaoui et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: