Answers are grounded in this paper and cite their sources.
This study comparatively investigated the effects of hydroxyapatite (HA), yttria-stabilized zirconia (YSZ), and a 50:50 wt.% HA–YSZ mixture on the powder-mixed electrical discharge machining (PMEDM) of Ti-6Al-4V, focusing on machining performance, surface integrity, and preliminary antibacterial activity. The nanopowders were dispersed in deionized water at a fixed total concentration of 1.0 g/L. A three-factor, three-level full factorial design comprising 27 experimental conditions was employed, with peak current (18, 24, and 30 A), pulse-on time (100, 150, and 200 μs), and nanopowder type as the investigated factors. Surface roughness (Ra), recast layer thickness (RLT), material removal rate (MRR), and electrode wear rate (EWR) were evaluated. Main-effects analysis of variance (ANOVA) indicated that nanopowder type significantly affected Ra, peak current and pulse-on time significantly influenced MRR, and all three factors significantly affected EWR, whereas no statistically significant main effect was detected for RLT. Grey relational analysis (GRA) ranked Experiment 14 (HA, 30 A, 100 μs) highest among the investigated conditions (GRG = 0.7468), followed by Experiments 1 and 25 (YSZ; GRG = 0.7406 and 0.7390, respectively). These rankings represent relative performance within the unreplicated experimental design rather than a statistically validated optimum. The three highest-ranked conditions were further characterized using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) and subjected to preliminary antibacterial assessment against a non-reference clinical isolate of Staphylococcus aureus. The total inhibition-zone diameters were 21, 20, and 30 mm for Experiments 14, 1, and 25, respectively, including the 8-mm specimen diameter, while the untreated Ti-6Al-4V reference showed no observable inhibition zone. The antibacterial assessment involved single observations without independent biological replication or a powder-free EDM control. Overall, the findings demonstrate response-dependent effects of the investigated PMEDM conditions and preliminary antibacterial responses of selected machined surfaces. Further replicated and controlled investigations are required to establish the mechanisms of inhibition and evaluate their biomedical relevance.
No takes yet. Share an insight, caveat, or question.
Shawi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: