Answers are grounded in this paper and cite their sources.
A novel copolymer was synthesized via free‐radical polymerization of acrylamide (AM), polyethylene glycol monoallyl ether (APEG400), a sulfobetaine‐functional monomer (PD), and hexadecyldimethylallyl ammonium chloride (C16DMAAC). Single‐factor optimization yielded optimal conditions: a monomer mass ratio (AM: PD: APEG400: C16DMAAC) of 94.8:3:1:1.2, 15 wt% total monomer concentration, 0.3 wt% initiator loading, 50°C, and 5 h reaction duration. Under these optimal conditions, the polymerization yield was 93.4%. The copolymer exhibits favorable thermal stability, salt tolerance, and shear resistance with pronounced salt‐thickening behavior: its apparent viscosity increases monotonically with rising NaCl or CaCl 2 concentration. A 0.6 wt% aqueous solution (initial viscosity 8.87 mPa·s) reaches 531 and 489 mPa·s in 250 g/L NaCl and CaCl 2 , respectively. Particle size analysis shows D 50 of polymer aggregates first decreases then increases with salinity, accompanied by a broadened size distribution. This arises from salinity‐modulated electrostatic interactions between –SO 3 − and –R 4 N + moieties in PD units and enhanced hydrophobic association. TEM reveals CaCl 2 forms a denser network with smaller pores, while NaCl induces sheet‐like aggregation. This salt‐thickening copolymer holds great potential as a functional additive for enhanced oil recovery in high‐salinity reservoirs.
No takes yet. Share an insight, caveat, or question.
Tian et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: