Answers are grounded in this paper and cite their sources.
During device fabrication, metal particles tend to adhere to the microstructures of silicon wafers, which in turn affects their proper operation. The use of supercritical carbon dioxide (SC-CO 2 ) to clean silicon wafers is an efficient approach. In this work, the effect of SC-CO 2 on particle removal from silicon wafers was studied numerically. Based on the oscillatory cleaning mode, the force model and the cleaning mechanism of particles were established, and the related parameters were analyzed. The results show that as the SC-CO 2 operating parameters changed periodically, the thermophysical properties, such as density and viscosity of SC-CO 2 , varied accordingly, causing fluctuations in the local flow around the particles. The particles located at the top of the cantilever were more difficult to remove, and therefore require particular attention. Increasing the oscillation frequency and pressure range of SC-CO 2 , as well as optimizing the temperature, could increase the force exerted on the particles. At an oscillation frequency, pressure range, and temperature of 30 min -1 , 8.5–11.5 MPa, and 315 K, respectively, the peak horizontal and vertical forces reached 35.9 × 10 −10 N and 1040.4 × 10 −10 N, respectively. Particle removal became more difficult as particle size increased. Optimizing the SC-CO 2 operating parameters expanded the time and particle-size ranges in which particles could be effectively removed, thereby improving particle removal.
No takes yet. Share an insight, caveat, or question.
(158002) et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: