Answers are grounded in this paper and cite their sources.
Ti2AlNb-based alloys are promising candidates for aeroengine hot-section components, but their narrow processing windows complicate hot forming. This study investigates the flow behaviors and hot workability of a forged Ti2AlNb-based alloy using isothermal compression tests at deformation temperature of 970–1060 °C and strain rates of 0.01–10 s−1. Four constitutive models are established to describe the flow behaviors, including strain-compensated Arrhenius, multiple linear regression, standard backpropagation (BP), and sparrow-search-optimized BP (SSA-BP) models. The SSA-BP model achieves the highest prediction accuracy, with correlation coefficients of 0.998 and 0.995 for the training and testing sets, respectively. The corresponding mean absolute relative errors are 1.95% and 3.31%, and the root mean square errors are 4.36 and 7.49 MPa. Processing maps constructed based on the Murty instability criterion identify a preferred hot processing window of 1030–1060 °C and 0.01–0.5 s−1 across the evaluated strains. Electron backscatter diffraction reveals a lower α2 phase fraction and a modest increase in the recrystallized grain fraction at higher temperatures. Higher strain rates suppress recrystallization and limit the growth of recrystallized grains. These findings provide alloy-specific guidance for selecting hot processing parameters.
No takes yet. Share an insight, caveat, or question.
Guo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: