Answers are grounded in this paper and cite their sources.
Wind-profile products are often reported on dense vertical grids, while neighbouring levels can share substantial covariance. This study quantifies the number and placement of reported heights needed to reconstruct a 15-level, 10 min mean horizontal wind-speed (WS_MEAN) radar product spanning 20–300 m under explicit root-mean-square error (RMSE) criteria. Historical profiles were used for proper orthogonal decomposition with QR-based height selection (POD–QR), and performance was evaluated in six forward-chaining windows against endpoint-matched layouts and a training-only exhaustive subset analysis. The all-six-fold POD–QR minimum was 14, 10, 5, and 3 retained levels at RMSE tolerances of 0.30, 0.40, 0.50 and 0.70 m s−1, respectively. At 0.50 m s−1, five levels achieved a mean RMSE of 0.395 m s−1 and ranked within the best 5.94% of endpoint-matched layouts in every fold. Seven levels reduced mean RMSE to 0.328 m s−1, with 91.3% of profiles below 0.50 m s−1. Early-fold layouts retained comparable performance in later periods, while profile curvature, level availability, and observation noise systematically affected recoverability. These findings support accuracy-constrained wind-profile product design and height-channel prioritisation, with potential applications in reduced-height sampling, missing-level reconstruction, data quality checks, and reduced transmission and storage requirements.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: