Answers are grounded in this paper and cite their sources.
Glass fiber-reinforced plastics (GFRPs) are the most widely used fiber-reinforced plastics. A large proportion of GFRP waste is still landfilled because thermosetting matrix resins are difficult to recycle. Fibers recovered by the thermal decomposition treatment show a lower tensile strength than virgin fibers. Furthermore, the loss of the sizing agent often results in poor fiber-matrix interfacial shear strength (IFSS). Fibers recovered by the nitric acid treatment are chemically eroded during the long immersion. Fuming nitric acid is a stronger oxidizing agent than nitric acid. It is therefore expected to decompose the epoxy resin in a short time and to introduce polar functional groups onto the fiber surface. In this study, glass fibers were recovered from cured GF/epoxy plain weave specimens using thermal decomposition, nitric acid treatment and fuming nitric acid treatment. The effects of these recycling treatments on the tensile properties of the recovered fibers and their IFSS with polyamide 12 (PA12) were investigated. The fuming nitric acid treatment decomposed the resin in 10 min, which was 1/600 of the time required for the nitric acid treatment. The fibers recovered using fuming nitric acid exhibited a tensile modulus of 60.6 GPa and a tensile strength of 1.25 GPa, which were comparable to those of virgin fibers. Their IFSS with PA12 was 30.6 MPa, which was 2.0 times that of virgin fibers. The enhanced IFSS is considered to be due to hydrogen bonding between PA12 and the oxygen- and nitrogen-containing functional groups in the organic layer remaining on the fiber surface.
No takes yet. Share an insight, caveat, or question.
TANAKA et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: