Answers are grounded in this paper and cite their sources.
Study Design Biomechanical. Objectives To compare subaxial cervical stability with a dental composite-plate construct versus lateral mass screw-rod construct. Methods 6 fresh-frozen human cadaveric cervical vertebrae (C4-C7) were prepared by stripping all soft tissues. Lateral mass screw fixation was performed bilaterally with standard freehand technique. Dental composite (Filtek) was applied to lamina before placement of a custom minifragment plate. Range of motion (ROM) and rotation to failure testing was performed using a robotic testing system (SimVITRO). Wilcoxon ranked sum test with Benjamini-Hochberg correction was used to compare results with significance set to p<0.05. Results The screw-rod construct (5.1±4.0 deg) and composite-plate construct (4.5±3.2 deg) significantly decreased flexion-extension ROM relative to native state (8.1±1.7 deg, p<0.05). Only the composite-plate construct (2.7±1.9 deg) significantly decreased lateral bending ROM relative to native state (4.7±2.5 deg, p<0.05). Both the screw-rod construct (7.0±4.3 deg) and composite-plate construct (5.7±3.7 deg) significantly decreased axial rotation ROM relative to native state (9.9±5.2 deg, p<0.05). Composite-plate also decreased axial rotation ROM relative to screw-rod, while both constructs had comparable ROM in flexion-extension and lateral bending. Flexion to failure for the composite-plate construct was 7.1 ± 1.7 N-m. Mechanism of failure was the composite cracking off bone. Conclusion Screw-rod and composite-plate constructs significantly decrease ROM compared to the native state and are comparable in stiffness. Failure of composite-plate occurs with composite cracking off undamaged bone surface. A strategy utilizing composite fixation may offer a reasonable alternative to screws for subaxial stabilization.
No takes yet. Share an insight, caveat, or question.
Wadhwa et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: