Answers are grounded in this paper and cite their sources.
The rapid expansion of solar photovoltaic (PV) and wind power is essential for reducing the carbon intensity of electricity supply; however, their weather-driven variability creates reliability challenges that require flexible generation and storage. This study develops and optimizes a utility-scale hybrid renewable energy system for Bangladesh integrating PV, wind, a hydrogen-fueled gas turbine, hydrogen storage through an electrolyzer-compressor-storage chain, and battery energy storage. Three cases are evaluated using hourly meteorological and load data: PV-wind-gas turbine; PV-wind-gas turbine with hydrogen storage; and PV-wind-gas turbine with combined hydrogen and battery storage. System sizing is formulated as a multi-objective optimization problem minimizing levelized cost of electricity (LCOE) and total CO₂ emissions and is solved using NSGA-II, CMOPSO, and MOEA/D, with performance assessed using standard metrics. Case 1 achieves a minimum LCOE of about 0.051 $/kWh but retains emissions above 6.5 × 10⁵ t CO₂/yr. Case 2 reduces emissions to about 4.6 × 10⁵ t CO₂/yr, although LCOE exceeds 0.13 $/kWh. Case 3 provides the best overall compromise, with a minimum LCOE of about 0.046 $/kWh and balanced solutions achieving 10–15% lower emissions than Case 1 at 0.057–0.063 $/kWh. Across the three scenarios, CMOPSO delivers the strongest overall search results. Sensitivity analysis shows that component costs, discount rate, and hardware efficiencies strongly influence the cost-emission trade-off, whereas moderate renewable-resource variations have comparatively limited effects on the Pareto front. In order to assess long-term reliability, future work should incorporate explicit component degradation, supply contingencies, additional renewable resources, and grid-market interactions.
No takes yet. Share an insight, caveat, or question.
Rakib et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: