Answers are grounded in this paper and cite their sources.
Precision machining of tungsten carbide (WC) presents challenges in surface quality, dimensional accuracy, and processing efficiency. This study developed an integrated computer numerical control (CNC) machining workflow combining ultrasonic-assisted machining (USM), stage-specific parameter allocation, and localized helical finishing. Conventional machining and USM were compared using DR14C, followed by machining parameter adjustments and toolpath optimization. The selected workflow was subsequently applied to TR15C and KG5. Under identical baseline conditions, USM reduced surface roughness from Ra 0.600 to 0.510 μm on the flat surface and from 0.617 to 0.504 μm in the groove, representing reductions of 15.0% and 18.3%, respectively. Confocal measurements further revealed reductions in mean Ra from 0.255 to 0.133 μm and mean Rz from 2.208 to 1.560 μm. The optimized process reduced CNC controller-simulated machining time by 82.7%. Localized helical finishing achieved Ra values of 0.352 and 0.429 μm on the flat and groove surfaces, respectively. Scanning electron microscopy (SEM), backscattered electron (BSE) imaging, and energy-dispersive X-ray spectroscopy (EDS) provided supplementary surface and elemental characterization. These findings demonstrated the effectiveness of the integrated workflow in improving machining quality and controller-predicted efficiency.
No takes yet. Share an insight, caveat, or question.
Yen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: