Answers are grounded in this paper and cite their sources.
A pyrolysis-side study was conducted to clarify how thermal severity and initial syngas pressure influence product redistribution and coke structure during heavy-oil conversion, providing experimental guidance for a proposed integrated pyrolysis–coke-gasification concept without claiming validation of the complete recycle process. Canadian oil-sands bitumen was pyrolyzed at 400–500 °C and initial syngas pressures of 0.5–5 MPa with a fixed CO/H2 volume ratio of 2:3. Pyrolysis temperature had the strongest effect on product distribution. As the temperature increased from 400 to 500 °C, the oil yield decreased from 46.67 to 22.13 wt %, while gas and coke yields increased. Approximately complete conversion was reached at 450 °C, whereas further heating mainly promoted secondary cracking and condensation. At 450 °C, increasing the initial syngas pressure from 0.5 to 5 MPa increased the oil yield from 29.86 to 35.53 wt % and reduced gas and coke yields by 3.62 and 2.05 wt %, respectively. The increase in liquid yield was mainly associated with an 11.72 wt % increase in VGO, accompanied by lower gasoline and diesel yields, indicating that higher pressure favored the retention of heavier liquid intermediates. Coke produced at higher temperatures was more condensed, more ordered, and less reactive, whereas higher syngas pressure resulted in a more disordered and functionalized carbon structure with higher oxidation reactivity. An exploratory composite structure–reactivity descriptor showed a strong within-data set association with the air-oxidation index (R2 = 0.9791; Q2LOO = 0.9498); however, the relationship is based on only eight unique operating conditions and requires external validation before predictive generalization. Considering conversion, product distribution, pressure severity, and coke reactivity, 450 °C and 1 MPa were retained as a reasonable bench-scale reference among the tested conditions, rather than as a temperature–pressure optimum.
No takes yet. Share an insight, caveat, or question.
Xiong et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: