Answers are grounded in this paper and cite their sources.
Floating offshore wind turbines (FOWTs) are essential for exploiting wind energy in deep and remote seas, overcoming the water-depth limitations of fixed-bottom turbines. However, their operation and maintenance (O&M) complexity and cost increase accordingly, prompting a shift from traditional methods to on-site operations. The replacement of large components—such as blades, generators, and nacelles—is one of the most critical and high-risk operations. To address these challenges, this study investigates the dynamic coupling characteristics between a floating wind turbine and a semi-submersible crane vessel during offshore large-component replacement. Focusing on the blade lowering phase, the effects of sling stiffness and lowering speed on the dynamic response of the blade lowering process are examined. The simulations consider a single environment with a significant wave height of 1.5 m, a spectral peak period of 6 s, and a 10 m reference wind speed of 12 m/s. In the first 200 s of lowering, the Sling 3 case exhibits a peak blade roll of approximately 3.5° and a peak plotted sling tension of about 180 kN, compared with about 110 kN for Sling 1 and Sling 2. The results provide important engineering guidance for improving the stability and safety of on-site large-component replacement operations and reducing maintenance costs.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: