Answers are grounded in this paper and cite their sources.
Electron beam powder bed fusion (EB-PBF) is a vacuum-based metal additive manufacturing technique that selectively melts metal powder layers with a high-energy electron beam; it features low residual stress, high build efficiency and few support requirements, and is widely applied to near-net-shape fabrication of hard-to-machine alloys such as Ti-6Al-4V, Inconel 718 and γ-TiAl. After each build, approximately 95%–98% of the un-melted powder can be recovered, sieved and re-used, making powder recycling critical to both cost reduction and sustainable manufacturing. Focusing on literature of the past fifteen years (2011–2026) together with key earlier works, this review summarizes the recovery–reuse loop and powder characterization methods, and classifies powder degradation into chemical (oxidation and elemental evaporation at high temperature in vacuum), physical (mechanical damage, morphological deterioration and particle-size drift) and functional (loss of flowability and charging behavior) aspects. It then analyzes the effects of powder reuse on part density, microstructure, static strength, impact toughness and fatigue, fatigue performance being the most sensitive to powder state. Recycling behaviors of Ti-6Al-4V, Inconel 718, γ-TiAl, H13 steel, CoCrMo and copper powders are compared, followed by quality-control strategies such as fresh-powder blending, sieving management, in-process monitoring and standardization, and reported powder reuse limits. Remaining problems (scattered characterization approaches, lack of unified reuse criteria, insufficient in-situ monitoring) and future directions toward standardized powder-quality metrics, online monitoring and closed-loop recycling are discussed.
No takes yet. Share an insight, caveat, or question.
Boxuan Wang (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: