Answers are grounded in this paper and cite their sources.
Triglycerides are clinically important biomarkers associated with metabolic and cardiovascular disorders, and their detection requires rapid and reliable methods. While conventional analytical techniques are accurate, they are often time-consuming, require complex instrumentation, and are not suitable for point-of-care applications. Here, we report a label-free impedimetric triglyceride biosensor based on novel conductive acrylic microspheres (ACM) that function simultaneously as an enzyme immobilization matrix and conductive sensing interface. ACM were synthesized via microemulsion and photopolymerization, followed by succinimide functionalization for covalent immobilization of lipase. Incorporation of polyacetylene (PA) imparted intrinsic conductivity, enabling ACM to function simultaneously as an enzyme immobilization matrix and conductive sensing interface. Electrochemical impedance spectroscopy confirmed efficient electron transfer, indicating that ACM can serve as a lower-cost alternative to gold nanoparticles, which typically require additional fabrication steps. The biosensor exhibited a linear response from 1–1000 mg dL–1 (R2 = 0.992) with a limit of detection of 0.0087 mg dL–1 and good repeatability and reproducibility with relative standard deviation of 4.41 % and 2.86 % (n = 8). Validation using tripalmitin-spiked pork fat demonstrated the practical feasibility of the proposed biosensor, supported by comparison with the standard titration method. The simplified design eliminates the need for gold nanoparticles, redox mediators, and multi-enzyme systems, offering a cost-effective and practical approach for triglyceride monitoring.
No takes yet. Share an insight, caveat, or question.
Rashid et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: