Answers are grounded in this paper and cite their sources.
Supercapacitors (SCs) are at the forefront of next-generation energy storage technologies because of their high-power density, rapid-rate capability, and improved longevity. However, supercapacitors have low energy density, which remains a major challenge. Herein, Tin (Sn)-doped Bi 2 O 3 is synthesized at various concentrations of Sn, and its electrochemical charge storage performance is evaluated in a three-electrode system and an asymmetric device configuration in a 1 M Na 2 SO 4 electrolyte. Among the Sn-doped Bi 2 O 3 samples, SB2 (3 wt%) exhibited a higher specific capacity of 249 C g −1 at 1 A g −1 than undoped α-Bi 2 O 3 . This improved performance may be attributed to tin incorporation, which facilitates electron transport through possible oxygen vacancy formation, structural distortion, and other structural modifications. Using Sn-doped Bi 2 O 3 as the anode and β-MnO 2 as the cathode, the assembled asymmetric coin-cell device in a neutral aqueous electrolyte operates steadily through a broad 2.4 V voltage window, showing a maximum energy density of 98.6 Wh kg −1 at 2400 W kg −1 , and exceptional cycling endurance accompanied by a high capacitive retention of 79% after 5000 cycles. Further, pouch cells were fabricated using PVA-Na 2 SO 4 as a gel electrolyte. Sn-Bi 2 O 3 || PVA-Na 2 SO 4 || MnO 2 pouch cell also showed a favorable energy density of 30.2 Wh kg −1 at 4800 W kg −1 . Additionally, to demonstrate practical applicability, the light-emitting diodes were illuminated by connecting pouch cells in series.
No takes yet. Share an insight, caveat, or question.
Sajith et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: